info@isol.pk 2nd Floor, 72, Westend Plaza, Shahrah-e-Quaid-e-Azam, Mozang Chungi, Lahore
Follow Us:
SKU: MOD-BMP280-3V3

BMP280 Digital Barometric Pressure & Altitude Sensor Module (I2C/SPI)

High-accuracy digital barometric pressure and temperature sensor designed for altitude calculation, weather stations, and drone flight controllers.

Quick Summary & Specs

BMP280 Digital Barometric Pressure & Altitude Sensor Module (I2C/SPI) is an original, pre-tested electronic module designed for Arduino, ESP32, Raspberry Pi, robotics, and embedded engineering projects. Includes verified pinout compatibility and nationwide express shipping across Pakistan.

24-48h Dispatch Cash on Delivery 7-Day Support & Warranty
Rs 315.00 Rs 350.00 -10% OFF

100 In Stock
Tested & Quality Guaranteed 100% Pre-tested & Genuine Silicon. 7-Day Replacement Warranty Across Pakistan.
Fast Local & Nationwide Shipping Same-Day Dispatch in Lahore | 2-3 Days COD to Karachi, Islamabad & All Pakistan.

The BMP280 is an absolute barometric pressure and temperature sensor module engineered by Bosch Sensortec for mobile, drone, and IoT weather monitoring applications.

Key Engineering Features:

- Ultra-High Altitude Resolution: Detects atmospheric pressure differences as small as ±0.12 hPa (equivalent to 1 meter altitude difference).
- Dual Communication Interface: Supports standard I2C and high-speed SPI bus protocols.
- Ultra-Low Power Consumption: Consumes only 2.7 µA at 1 Hz sampling, ideal for battery-operated weather stations.
- Factory Calibrated: Internal factory calibration coefficients stored in NVM for instant, accurate measurement.

Common Engineering Applications:

- Drone auto-hover altitude hold and variometer
- IoT meteorological and atmospheric weather stations
- Indoor navigation and floor-level elevator detection
- Weather forecast forecasting via barometric trend

What's Included in the Package:

  • 1x BMP280 Barometric Pressure Sensor Module
  • 1x 6-Pin Male Header Strip

Pinout Interfacing & Testing Guide:

Step 1: Verify Pinout & Voltage

Check the silkscreen pin labels (VCC, GND, SDA/SCL or I/O) and confirm whether your microcontroller uses 3.3V or 5V logic.

Step 2: Connect to Microcontroller

Wire the power, ground, and signal pins to your Arduino, ESP32, or Raspberry Pi using breadboard jumper wires.

Step 3: Run Sample Test Sketch

Upload a standard test sketch via Arduino IDE or MicroPython and verify live readings on the Serial Monitor.

Component Quality Note: Every sensor, display, and driver module is bench-inspected and covered by our 7-day replacement warranty.
Custom Prototyping & FYP Enclosures

Need a Custom 3D Printed Casing or Multilayer PCB?

Get custom snap-fit enclosures and robotics parts printed via our custom 3D printing service in Lahore & Pakistan, or order industrial double-sided circuit boards through our custom PCB fabrication service with nationwide delivery.

Key Features

Dual I2C/SPI Bus Compatible with high-speed flight controllers and standard Arduino.
Pre-Calibrated Silicon Factory calibrated offsets ensure immediate high reliability.
Precision Barometric Sensing Capable of measuring height changes down to 1 meter.

Specifications

Current Consumption 2.7µA @ 1Hz pressure & temperature
Dimensions 15mm x 12mm x 2.5mm
Interface Protocol I2C (up to 3.4MHz) and SPI (3-wire / 4-wire up to 10MHz)
Operating Voltage 1.8V – 3.6V DC (with onboard 3.3V regulator)
Pressure Measurement Range 300 hPa to 1100 hPa (+9000m to -500m sea level)
Relative Pressure Accuracy ±0.12 hPa (corresponds to ±1 meter elevation)
Temperature Measurement Range -40°C to +85°C (±1.0°C accuracy)

Community Questions & Answers

Have a question about compatibility, code, or delivery? Ask our engineering team or see what other Pakistani makers asked.

Login to Ask Question
Verified Answers by ISOL Engineers
No questions asked yet for this item

Be the first student or maker to ask a question!

Customer Reviews

Average Rating

0

Based on 0 reviews

No reviews yet. Be the first to share your experience!

Chat with Support Online